Skip to content
DNA concept art

Minimum Information for Publication of Quantitative real time PCR Experiments

How to report

In order to ensure experimental transparency, consistency between research laboratories and thus, maintain a high level of integrity in publications, a guideline for real-time PCR experiments has been edited in 2009 by an international research team [PMID: 19246619].

Considering the increasing number of publications in the Digital PCR field, the MIQE (for Minimum Information for Publication of Quantitative real-time PCR Experiments) guideline has been updated for digital PCR experiments under the name “the Minimum Information for the Publications of Quantitative Digital PCR Experiments guidelines (dMIQE)”[PMID: 23570709].

Having a look at this guideline before starting designing an experiment can be very informative. Indeed, as an example of what you can read in the dMIQE, you will find, below (Table 1), a checklist you might follow for performing a digital PCR experiment. Finally, all items are categorized as essential (E) or desirable (D) for manuscript submission. Thus, citing the following dMIQE in your publication will be a guarantee of quality, for reviewers and readers.

dMIQE checklist

Table 1. dMIQE checklist for authors, reviewers and editors.a
Item to checkImportanceItem to check 2Importance
Experimental designdPCR oligonucleotides
Definition of experimental and control groups.EPrimer sequences and/or amplicon context sequence.bE
Number within each group.ERTPrimerDB (real-time PCR primer and probe database) identification number.D
Assay carried out by core lab or investigator’s lab ?DProbe sequences.bD
Power analysis.DLocation and identify of any modifications.E
SampleManufacturer of oligonucleotides.D
Description.EPurification method.D
Volume or mass of sample processed.EdPCR protocol
Microdissection or microdissection.EComplete reaction conditions.E
Processing procedure.EReaction volume and amount of RNA/cDNA/DNAE
If frozen-how and how quickly?EPrimer, (probe), Mg ++ and dNTP concentrations.E
If fixed- with what, how quickly?EPolymerase identity and concentration.E
Sample storage conditions and duration (especially for formalin-fixed, paraffin-embedded samples).EBuffer/kit catalogue no. and manufacturer.E
Nucleic acid extractionExact chemical constitution of the bufferD
Quantification-instrument/method.EAdditives (SYBR green I, DMSO, etc.).E
Storage conditions: temperature, concentration, duration, buffer.EPlates/tubes Catalogue No and manufacturer.D
DNA or RNA quantificationEComplete thermocycling parameters.E
Quality/integrity, instrument/method, e.g. RNA integrity/R quality index and trace or 3’:5’.EReaction setup.D
Template structural information.EGravimetric or volumetric dilutions (manual/robotic).D
Template modification (digestion, sonication, preamplification, etc.)ETotal PCR reaction volume prepared.D
Template treatment (initial heating or chemical denaturation).EPartition number.E
Inhibition dilution or spike.EIndividual partition volume.E
DNA contamination assessment of RNA sample.ETotal volume of the partitions measured (effective reaction size).E
Detail of DNase treatment where performed.EPartition volume variance/SD.D
Manufacturer of reagents used and catalogue numberDComprehensive details and appropriate use of controls.E
Storage of nucleic acid: temperature, concentration, duration, buffer.EManufacturer of dPCR instrument.E
RT (if necessary)dPCR validation
cDNA priming method + concentration.EOptimization data for the assay.D
One- or 2-step protocol.ESpecificity (when measuring rare mutations, pathogen sequences etc.)E
Amount of RNA used per reactionELimit of detection of calibration control.D
Detailed reaction components and conditions.EIf multiplexing, comparison with singleplex assays.E
RT efficiency.DData analysis
Estimated copied measured with and without addition of RT.bDMean copies per partition (ʎ or equivalent).E
Manufacturer of reagents used and catalogue number.DdPCR analysis program (source, version).E
Reaction volume (for 2-step RT reaction).DOutlier identification and disposition.E
Storage of cDNA : temperature, concentration, duration, buffer.DResults of no-template controls.E
dPCR target informationExamples of positive(s) and negative experimental results as supplemental data.E
Sequence accession number.EWhere appropriate, justification of number and choice of reference genes.E
Amplicon length.ENumber and concordance of biological replicates.D
In silico specificity screen (BLAST, etc.)ENumber and stage (RT or dPCR) of technical replicates.E
Pseudogenes, retropseudogenes or other homologs?DRepeatability (intraassay variation).D
Sequence alignment.DReproductibility (interassay/user/lab etc. variation).D
Secondary structure analysis of amplicon and GC content.DExperimental variance or Cl.dE
Location of each primer by exon or intron (if applicable).EStatistical methods used for analysis.E
Where appropriate, which splice variants are targeted?EData submission using RDML (Real-time PCR Data Markup Language).  D

a All essential information (E) must be submitted with the manuscript. Desirable information (D) should be submitted if possible.b Disclosure of the primer and probe sequence is highly desirable and strongly encouraged. However, since not all commercial predesigned assay vendors provide this information, when it is not available assay context sequences must be submitted [Bustin et al. (48)].c Assessing the absence of DNA using a no-RT assay (or where RT has been inactivated) is essential when first extracting RNA. Once the sample has been validated as DNA free, inclusion of a no-RT control is desirable, but no longer essential.d When single dPCR experiments are performed, the variation due to counting error alone should be calculated from the binomial (or suitable equivalent) distribution.

Want to discover more dPCR experiments?

Check out our other tutorials!